Ruger 10/22 Accessories

Please note that all references to 10/22 are a registered trademark of Sturm Ruger.

Welcome  to our Ruger 10/22 products page.  The Ruger 10/22 is one of the most fun rifles there is to own, and customizing them is almost as much fun as shooting them!  Our complete line of action accessories, together with our Aftermarket Stocks and Match Grade Barrels, are designed to help you turn your stock 10/22 into a custom tack driving rifle that looks as good as it shoots!   

Parts Drawings

 Click on the picture to  check out our Exploded Views Pages!
 
Rimfire Technologies Extended Magazine Release (Barrel Fluted)

This is a new and improved version of the already popular extended magazine release.  This new version features all machined parts (no more modified factory parts).  Offered in a variety of colors, they can be combined with the custom triggers and extended bolt handle assemblies for a truly custom look.  This is the Barrel Fluted version.

Red

Product # rtmr-b-r

$18.95
 

Black

Product # rtmr-b-bk

$18.95
 

Blue

Product # rtmr-b-b

$18.95
 

Silver

Product # rtmr-b-s

$18.95
 
Rimfire Technologies Extended Magazine Release (Helical Fluted)

This is a new and improved version of the already popular extended magazine release.  This new version features all machined parts (no more modified factory parts).  Offered in a variety of colors, they can be combined with the custom triggers and extended bolt handle assemblies for a truly custom look.  This is the newHelical Fluted version.

 Green

Product # rtmr-h-g

$18.95
       

Red

Product # rtmr-h-r

$18.95
 

Black

Product # rtmr-h-bk

$18.95
 

Blue

Product # rtmr-h-b

$18.95
 

Silver

Product # rtmr-h-s

$18.95
 
Rimfire Technologies Extended Bolt Handle Assembly ( Barrel Fluted)

In a joint effort between Rimfire Technologies and HawkTech Arms,  we are proud to announce the arrival of the Extended Bolt Handle Assembly.  Offered in a variety of colors, they can be combined with the custom triggers and extended magazine releases for a truly custom look.  This is the Barrel Fluted version.

Red

Product # rtebh-b-r

$36.95
 

Black

Product # rtebh-b-bk

$36.95
 

Blue

Product # rtebh-b-b

$36.95
 

Silver

Product # rtebh-b-s

$36.95
 

CHECK OUT THE TEN22 INNOVATIONS O-RINGS FOR THESE FINE BARREL FLUTED PRODUCTS!
Rimfire Technologies Extended Bolt Handle Assembly ( Helical Fluted)

In a joint effort between Rimfire Technologies and HawkTech Arms,  we are proud to announce the arrival of the Extended Bolt Handle Assembly.  Offered in a variety of colors, they can be combined with the custom triggers and extended magazine releases for a truly custom look.  This is the new Helical Fluted version.

 Green

Product # rtebh-h-r

$36.95
       

Red

Product # rtebh-h-r

$36.95
 

Black

Product # rtebh-h-bk

$36.95
 

Blue

Product # rtebh-h-b

$36.95
 

Silver

Product # rtebh-h-s

$36.95
 
Rimfire Technologies Full Width Trigger

This is the long awaited full width trigger by Rimfire Technologies.   This trigger is suitable for use with any trigger system using the factory based design and is extremely comfortable.  With the straight trigger pull, it offers the offhand shooter a distinct advantage through design.  Offered in a variety of colors, with an unfinished option, suitable for painting or polishing.  *The FW trigger requires a minor modification to the Trigger Housing.

 Green

Product # rtfwt-r

$28.95
       

Red

Product # rtfwt-r

$28.95
 

Black

Product # rtfwt-bk

$28.95
 

Blue

Product # rtfwt-b

$28.95
 

Silver

Product # rtfwt-s

$28.95
Rimfire Technologies Micro-Pivot Adjustable Bedding Kit

This is the first "adjustable" bedding kit of it's kind.   It comes with complete instructions and two different options for installation, including an optional rear receiver "anchor" for optimal stability.  *Requires drilling your stock as well as the receiver if using the whole system.

Product # rtbk

$29.95
Rimfire Technologies Custom Modified V-Block

Machined from a solid piece construction and designed to be used in conjuction with the Micro-Pivot Bedding Kit, or by itself, this high quality V-Block is a must have.   Better than the factory piece, it has a set screw that allows you to adjust for barrel droop.  

Product # rtvb

$23.95

Ruger 40th Anniversary Clear Factory Rotary Magazine

 

Enjoy the function and reliability that only the original factory magazine can provide with this limited edition clear magazine.  Hurry, supplies are limited! 

Factory Ruger 10/22 magazine, 10-shot

 

Product # r1022cm

$17.95
Ruger Factory Rotary Magazine

 

Despite the number of aftermarket magazines available for the Ruger 10/22, none of them are as reliable as the original factory magazine, with it's unique rotary design.

Factory Ruger 10/22 magazine, 10-shot

 

Product # r1022m

$13.95

TEN22 ShockStop Bolt Buffer

 

By now, everyone is aware of the benefits of bolt buffers.  The TEN22 ShockStop Buffer is designed to do more than just make your 10/22 function more efficiently.  By producing this highly advanced polyurethane at just the right durometer (hardness), the end result is a buffer that will protect your receiver and optics by absorbing and dispersing the damaging shock associated with metal to metal contact during firing. Backed by an unlimited lifetime warranty  against breakage, the ShockStop buffer is the last buffer you will ever need.   ShockStop Buffers....Clearly Better!    

Single Buffer

Product # t221022bb

$5.95

3-Pack

Product # t221022bb3

$11.95
TEN22 Innovations Stainless Hex Head Takedown Screw

 

No more marred slotted screws!  This hex head screw replaces the factory slotted screw. It allows the shooter to use a torque wrench for precise and repeatable settings.  

 

Product # t22tds

Backordered
TEN22 O-Rings for RT Barrel Fluted Products

If you have purchased a Barrel Fluted Product from Rimfire Technologies, now you can dress it up even more!  Our perfectly sized O-Rings will give your Barrel Fluted Mag Release and Bolt Handle a great look and improved feel.   Check them out for yourself.   They are a great way to make a great product even better! 

Mag Release Rings

Product # t22or_mr

$1.95
       

Bolt Handle Rings

Product # t22or_bh

$2.95
       

Combo Pack

Product # t22or_cp

$4.50

Link to Volquartsen Home Page

Volquartsen 10/22 Products

Considered by many to be the pioneers of the "10/22 craze",  VOLQUARTSEN CUSTOM™ uses state of the art CNC and EDM machines to produce the very best quality original products and aftermarket accessories for your entire rimfire collection.
VCL 10/22 Target Hammer

The target hammer is designed to give the factory Ruger 10/22 a superb "trigger job" by simply replacing the factory hammer. The hammer notch is precision surface ground. No stoning or fitting is required. Reduces trigger pull down to approximately 2.5 - 2.75lbs.
Product specifications: Hardened Stainless Steel
 

Product# vq1022th

$33.95
VCL 10/22 Match Hammer and Sear

Includes a target hammer and sear, together with hammer shims. These parts are mated together for superior performance. Reduces trigger pull down to approximately 2.25 - 2.5lbs.
 

Product# vq1022mhs

$65.95
VCL 10/22 Auto Bolt Release 

Enables the shooter to simply pull back bolt slightly to the rear and the bolt automatically releases thus eliminating the need to push up and backward on the bolt lock mechanism to release bolt. It is an easy, drop in installation.
Product specifications: Blued Steel, Stainless Steel

Black

Product# vq1022abr-b

$9.95

Silver

Product# vq1022abr-s

$9.95
VCL 10/22 Extended Magazine Release

The extended magazine release allows for a quick release of factory magazines. Simply reach in front of the trigger guard and push forward, no more having to push up on the factory release. It extends .550" down from the trigger guard housing designed not to interfere with benchrest or sandbags during shooting.
Product specifications: Aluminum.
 

Black

Product# vq1022emr-b

$17.95

Silver

Product# vq1022emr-s

$17.95
VCL 10/22 Target Trigger

Improved trigger design gives the shooter more trigger control. Also features an overtravel adjustment screw.
Product specifications: Black Anodized Aluminum

Product# vq1022tt

$22.95
VCL 10/22 Exact Edge Extractor

The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances.  It is hardened to a Rc 58-60 to withstand years of use and still maintain its edge. The hook is .005" closer to the rim of the cartridge to allow for the most positive extraction available.
Product specifications: Hardened A2 tool steel

 

Product# vq1022ee

10.95
VCL Barrel Mounted Scope Base 
A Weaver style scope mount designed to mount directly to .925" bull barrels. The mount cantilevers back over the receiver and utilizes one tension set screw in the rear of the mount for stability. It assures that the scope will always be in alignment with the barrel regardless of any movement between barrel and receiver.  Product specifications: Aluminum,  Fits .925" barrels
 

Black

Product# vq1022sb-b

$29.95

Silver

Product# vq1022sb-s

$29.95

VCL 10/22 Bedding System

This is the same bedding system that Volquartsen uses on their custom rifles. The system will install in less than 10 minutes, requiring no mixing of compounds.  The kit comes complete with aluminum bedding block, foam pressure pad, and special installation drill bit, along with complete instructions.
Product specifications: Fits Ruger 10/22LR & 10/22Magnum

Product# vq1022bs

$18.95
VCL 10/22 Bedding System Refill Kit

This is the same Bedding System as listed above, minus the installation drill bit.  It is designed for those who want to install the Bedding System on multiple guns.

Product# vq1022bs-r

$10.95
VCL 10/22 Stabilization Module 

Aligns exiting barrel gas so it surrounds and stabilizes the bullet for increased accuracy. Turned from lightweight aluminum so it won't change the balance or feel of your rifle. Installs easily by clamping onto .925" bull barrels.
Product specifications: Aluminum, weighs 1.8oz
 

Black

Product# vq1022sm-b

$47.25

Silver

Product# vq1022sm-s

$47.25
VCL 10/22 TG2000 
A complete CNC machined trigger guard equipped with precision EDM parts, including an internal pre-travel adjustment, a precision ground hammer made of 440C stainless steel, and an EDM sear and disconnector made of A2 hardened tool steel with tolerances being held to +/- .0002" assuring every trigger let off to be extremely consistent. The trigger is black anodized and equipped with an over-travel adjustment screw.  The TG2000 comes with custom springs, automatic bolt release and an extended magazine release. It is machined to give a superb, crisp trigger that will provide years of enjoyment to the shooter who demands the very best.
 

Black

Product# vq1022tg-b

194.95

Silver 

Product# vq1022tg-s

$194.95
VCL 10/22 High Performance Action Kit Plus

This kit consists of target hammer with shims, EDM disconnector, EDM sear, target trigger with over-travel adjustment, trigger plunger with an improved radius, trigger plunger spring, and a special hammer spring. Also included is an extended magazine release, an automatic bolt release, and a recoil buffer to reduce wear on the action and/or bolt. The HP action kit plus will give the shooter one of the most crisp, clean trigger pulls available. Reduces trigger pull down to approximately 2.25 - 2.5lbs.

Product# vq1022ak-p

Backordered
VCL 10/22 Extended Bolt Handle Assembly

   

The Extended Bolt Handle features the same shape and design as the bolt handle featured on our fully machined bolts. This handle has also been extended .25" for faster, easier operation. The recoil rod is polished, hardened and then TIN Coated. This finish is not only extremely hard but also contains lubricating features to create an extremely smooth operating guide rod. This coated recoil rod reduces friction which improves both feeding and ejecting. A recoil rod spring is also included. This spring has been cryogenically treated to withstand years of use.

 

Product# vq1022ebh

$28.95
VCL 10/22 Hex Head Take Down Action Screw

Hex head screw replaces the factory slotted screw. It allows the shooter to use a torque wrench for precise and repeatable settings. No more marred slotted screws which diminish the apperance of your rifle.
Product specifications: Hardened Alloy Steel

Product# vq1022has

$4.95
Features a hardened tuned extractor for positive, consistent extraction and a unique round titanium firing pin for faster lock time to assure positive ignition.  Includes a recoil rod, spring and bolt handle. 

Product# vq1022mba

$168.95

Link to Power Custom Home Page

Power Custom 10/22 Products

Power Custom specializes in marketing custom fixtures and accessories for gunsmiths and serious competitors.  They offer a wide variety of 10/22 products, and stand behind their entire product line.  All PC parts are fully guaranteed to work. 
PC 10/22 Adjustable Hammer/Sear Pack with Target Trigger!

 

Like the Hammer and Sear Kit, this kit produces a 2 ¾ lb. trigger pull. This new kit however, also includes a Target Trigger and an adjustment screw in the sear which allows you to adjust the pre-travel to give you the best trigger possible with this type of drop-in kit!  NO MORE CREEP!  Due to a specially designed trigger, which comes as part of your kit, the contact between hammer and sear is fully adjustable without removing any trigger parts!  As with all Power Custom products, these are the highest quality parts on the market. EDM produced. Includes an Extra Power Hammer Spring, Extra Power Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims.
 

Product #  pc1022adjhst

$89.95
PC 10/22 Adjustable Hammer/Sear Pack

*This kit does not include the trigger, as pictured.

This is the same as the kit listed above, minus the trigger. The adjustment screw in the sear allows you to adjust the pre-travel to give you the best trigger possible with this type of drop-in kit!  NO MORE CREEP!   As with all Power Custom products, these are the highest quality parts on the market. EDM produced.

 

Product #  pc1022adjhs

$69.95
PC 10/22 Adjustable Sear

 

This is the same sear from the adjustable kits.  It allows you to adjust the pre-travel to give you the best trigger possible with this type of drop-in kit!  NO MORE CREEP!   As with all Power Custom products, these are the highest quality parts on the market. EDM produced.   Includes the sear only.
 

Product #  pc1022adjs

$32.95
PC 10/22 Competition Hammer
Drop in designed to lighten your trigger pull to 2 ¾ LBS. Precision ground with vapor honed engagement surfaces. Includes EP hammer spring, replacement trigger return spring, and 2 hammer shims.

 

Product#  pc1022ch

$28.95
PC 10/22 Hammer and Sear Pack

Drop in kit that produces a 2 ¾ LBS. Trigger pull. These are the highest quality parts on the market. EDM produced. Includes an Extra Power Hammer Spring, Extra Power Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims.

Product# pc1022hsp

$49.95
PC 10/22 Titanium Trigger

With Over-travel Adjustment Stop. Larger, Lower Contour allows finger to be placed lower on the trigger for better control with less pressure. Also, the trigger face has a smooth round surface.

Product# pc1022tt

$52.95
PC 10/22 Competition Titanium Extended Auto Bolt Release

Manufactured by EDM process.  This strong, light weight release extends 1/8" lower than the factory bolt release.  In addition, it is serrated to give you a non-slip advantage to release your bolt much faster and easier.  It drops right in without any modifications.

Product# pc1022abr

$13.95
PC 10/22 A2 Claw Extractor

Sharp Claw Extractor- redesigned to be hard, sharp, & strong where it needs to be which allows for more positive extraction. 

Product# pc1022tce

$8.95
PC 10/22 A-2 Steel Firing Pin
Wire EDM cut from A-2 Steel.  Extra mass for reduced incidence of misfires caused by light primer strikes. 

Product# pc1022sfp

$27.95
PC 10/22 Receiver Mounted Scope Base 

Quality machined aluminum Weaver Style mount that will attach to your receiver with out drilling and tapping. Includes 6 cross slots to allow for some scope ring adjustments. Includes 4 screws and an allen wrench. 
 

Black

Product# pc1022sb-b

$14.95

Silver

Product# pc1022sb-s

$14.95
PC 10/22 Receiver/Barrel Mounted Scope Base 

Quality machined aluminum base that attaches to both your receiver and barrel.  Includes 9 cross slots to allow for multiple positions of your scope rings.  Includes a total of 6 holes for mounting,  4 holes for the receiver and 2 for the barrel.  Includes 6 screws and an allen wrench. *Requires drilling and tapping your barrel.
 

Black

Product# pc1022asb-b

$40.95

Silver

Product# pc1022asb-s

$40.95
PC 10/22 Titanium Bolt Handle Assembly

Bolt Handle is ½" longer and is lighter than the factory bolt. This assembly, along with the Titanium Firing Pin (not included) make a lighter, smoother, more positive feeling action for faster cycling and more positive ignition.

Product# pc1022bha

$48.95
PC 10/22 Trigger Shims

Helps eliminate excessive trigger/sear play in your action, which will improve your overall trigger performance.

Product# pc1022ts

$14.95
PC 10/22 Hammer Shims

Helps eliminate excessive hammer play in your action, which will improve your overall trigger performance.

Product# pc1022hs

$14.95
PC 10/22 Competition Trigger Kit
 

The 10/22 Competition Hammer and Sear pack, Titanium Trigger, Buffer Technologies Shock Buff, 2 Hammer shims, 2 Trigger Shims, EP Hammer Spring, EP Disconnector Spring & Replacement Trigger Return Spring.

 

Product# pc1022ctk

$94.95
PC 10/22 Action Kit

Includes: 

The Titanium Firing Pin, Titanium Extended Bolt Handle, Titanium Trigger and Titanium Extended Magazine Release.

 

Product# pc1022ak

$152.95
PC 10/22 Grand Master Action Kit

Includes:

The Titanium Firing Pin, Titanium Extended Bolt Handle, Titanium Trigger, Titanium Extended Magazine Release, & the Hammer & Sear Pack.

 

Product# pc1022gmak

$189.95

WeaponKraft 10/22 Products
WK 10/22 Urethane Bolt Recoil Buffer

These buffers simply replace the steel Bolt Stop  Pin (#B-46), and will make your 10/22 shoot so softly you'll wonder if you squeezed the trigger. That annoying "Clack" when firing will disappear completely with the installation of these Buffers. The Buffer eliminates metal to metal contact during recoil, protecting your receiver and optics from any shock-induced damage. After researching and testing different materials from Delrin to Vekton to Nitrile, among other materials, Hanson R&D has found the Urethane alloy used in WeaponKraft buffers to be the best material available for this application. This is backed up with a full money back guarantee. If you don't like them, send them back for a full refund.

CAUTION!  THESE BUFFERS ARE NOT FOR USE WITH VOLQUARTSEN CNC BOLTS!

Product # wkbb

Backorderd

KID 10/22 Match Trigger

The 'KID' Match Trigger is quite possibly the finest 2-stage trigger on planet earth!  It is, without question, the finest trigger ever developed for the Ruger 10/22.

Please note:   In order to use this trigger assembly with the Volquartsen CNC Bolt, you must notify us at time of ordering so that the appropriate adjustments can be made for full compatability.  This may delay shipping a few days.

Product # kid1022tg

$289.95
KID 10/22 Receiver Pin Kit

The 'KID' Receiver Pin Kit eliminates excessive play between the receiver and trigger assembly.  Comes with counter sink.

Product # kid1022pk

$33.95

E & L Manufacturing 10/22 Products
ELM 10/22 Dual-Clip Holder
The Dual-Clip Holder is designed to utilize the Ruger factory 10-Shot rotary magazine, the most reliable magazine for the 10/22.  This will give you rapid access to 20 rounds, without the hassles and mis-feeds associated with other "aftermarket" hi-cap magazines.

Product # el1022dch

$7.95

CST 10/22 Automatic Bolt Stop + Mag*

Until now there has not been a successful means to perform a last shot bolt hold-open function in the Ruger 10/22. The reason for this is due to the rotary design of the 10/22 magazines. Unlike other semi-auto firearms with a bolt hold-open function, the 10/22 magazines have no tripping mechanism built into the magazine follower. The CST Auto-Bolt Stop with its patented “Passive Activation” function overcomes this by eliminating the need to interact with the magazine follower. Instead, the mechanism interacts directly with a cartridge in the magazine. If a cartridge is present in the magazine, then the mechanism allows the free movement of the bolt's forward movement. Once there is an absence of a cartridge, the mechanism rotates to block the forward travel of the bolt. The magazine or the magazine follower is irrelevant to the bolt stop's function. This allows the CST Auto-Bolt Stop to work with or without an empty magazine in place, making it arguably the safest bolt stop design in the world.  This product comes with ONE modified factory magazine.  Additional magazines may be purchased.
 

Product # cst1022abs

$54.95

 

© 2002 HawkTech Arms, All Rights Reserved

Hit Counter

Please contact us if you experience any problems with the site.

This page was last updated 11/03/09