Ruger 10/22 Magnum Accessories

 Please note that all references to 10/22 are a registered trademark of Sturm Ruger.

Welcome  to our Ruger 10/22Magnum products page.  As much fun as it is to own a 10/22, the Magnum is just as fun...with more PUNCH!  The only difference in customization between the two of them, is that there are fewer products available for the Magnum, but don't let that stop you!  There is still plenty available. In addition to offering a complete line of action accessories, we also offer a few Aftermarket Stocks and Match Grade Barrels for the Magnum as well, making it just as easy to help you turn your 10/22Magnum into a custom tack driving rifle.  

For specific product information and ordering instructions, scroll down the page to view our product descriptions, or click on one of the Vendor Links to be taken directly to that section of the page. 

 

We are proud to offer quality products from the following vendors:

Volquartsen    Power Custom

 

Volquartsen 10/22Magnum Products

Considered by many to be the pioneers of the "10/22 craze",  VOLQUARTSEN CUSTOM™ uses state of the art CNC and EDM machines to produce the very best quality original products and aftermarket accessories for your entire rimfire collection.
VQ 10/22 Exact Edge Extractor

The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances.  It is hardened to a Rc 58-60 to withstand years of use and still maintain its edge. The hook is .005" closer to the rim of the cartridge to allow for the most positive extraction available.
Product specifications: Hardened A2 tool steel

Product# vq1022ee

$10.80
VQ 10/22 Magnum Performance Kit

This kit consists of target hammer with shims, EDM disconnector, EDM sear, and target trigger with over-travel adjustment, trigger plunger with an improved radius, trigger plunger spring, and a special hammer spring.  The kit also includes an extended magazine release.  Reduces trigger pull down to approximately 2.75lbs.

Product# vq1022mpk

Backordered until April 20th
VQ 10/22 Magnum TG2000 
A complete CNC machined trigger guard equipped with precision EDM parts, including an internal pre-travel adjustment, a precision ground hammer made of 440C stainless steel, and an EDM sear and disconnector made of A2 hardened tool steel with tolerances being held to +/- .0002" assuring every trigger let off to be extremely consistent. The trigger is black anodized and equipped with an over-travel adjustment screw.  The TG2000 comes with custom springs, automatic bolt release and an extended magazine release. It is machined to give a superb, crisp trigger that will provide years of enjoyment to the shooter who demands the very best.
 

Black

Product# vq1022mtg-b

$194.95

Silver 

Product# vq1022mtg-s

$194.95
VQ 10/22 Hex Head Take Down Action Screw

Hex head screw replaces the factory slotted screw. It allows the shooter to use a torque wrench for precise and repeatable settings. No more marred slotted screws which diminish the apperance of your rifle.
Product specifications: Hardened Alloy Steel

Product# vq1022hts

$4.95

VQ 10/22 Bedding System

This is the same bedding system that Volquartsen uses on their custom rifles. The system will install in less than 10 minutes, requiring no mixing of compounds.  The kit comes complete with aluminum bedding block, foam pressure pad, and special installation drill bit, along with complete instructions.
Product specifications: Fits Ruger 10/22LR & 10/22Magnum

Product# vq1022bs

$18.95
VQ 10/22 Bedding System Refill Kit

This is the same Bedding System as listed above, minus the installation drill bit.  It is designed for those who want to install the Bedding System on multiple guns.

Product# vq1022bs-r

$10.95
VQ 10/22 Stabilization Module 

Aligns exiting barrel gas so it surrounds and stabilizes the bullet for increased accuracy. Turned from lightweight aluminum so it won't change the balance or feel of your rifle. Installs easily by clamping onto .925" bull barrels.
Product specifications: Aluminum, weighs 1.8oz
 

Black

Product# vq1022sm-b

$47.25

Silver

Product# vq1022sm-s

$47.25

Link to Power Custom Home Page

Power Custom 10/22Magnum Products

Power Custom specializes in marketing custom fixtures and accessories for gunsmiths and serious competitors.  They offer a wide variety of 10/22 products, and stand behind their entire product line.  All PC parts are fully guaranteed to work. 
PC 10/22 Competition Titanium Extended Auto Bolt Release

Manufactured by EDM process.  This strong, light weight release extends 1/8" lower than the factory bolt release.  In addition, it is serrated to give you a none slip advantage to release your bolt much faster and easier.  It drops right in without any modifications.

Product# pc1022MAGabr

$14.95
PC 10/22 Magnum A-2 Steel Firing Pin
Wire EDM cut from A-2 Steel.  Extra mass for reduced incidence of misfires caused by light primer strikes. 

Product# pc1022msfp

$27.95
PC 10/22 Titanium Claw Extractor

Sharp Claw Extractor- redesigned to be hard, sharp, & strong where it needs to be which allows for more positive extraction. 

Product# pc1022tce

$8.95

 

© 2002 HawkTech Arms, All Rights Reserved

Hit Counter

Please contact us if you experience any problems with the site.

This page was last updated 04/09/09